ZedBoard Lab 7 Hangs
Forums: TrainingI have completed software lab 7 for the Zedboard. When I run my boot image it seems to run fine except it hangs on the line that tests the Ethernet port in the Test_Peripherals...
View ArticleSPI stand alone example
Forums: TrainingHi,I look for simple tutorial on SPI for stand alone project to test my LCD init., so far I only found this...
View Articlelearning programming microzed 7010 board for PS(processor)
Forums: TrainingHello Dear,i am studying microcontroller microzed 7010 board at my univesity, i have too much difficulty to understand how to use the functions ,the libraries,i have difficulties to...
View ArticleLab1 of Designing Accelerators for the Zynq®-7000
Forums: TrainingHi, I am trying to run the lab1 of "Designing Accelerators for the Zynq®-7000 All Programmable SoC" on a microzed board with Z7020 device on it. The labs are either for zedboard with...
View Article[MicroZed] Can't get Hello World to print anything in console/minicom
Forums: TrainingI have been following the support tutorials from http://zedboard.org/support/design/1519/10, and I have followed every step and I can't get my MicroZed to print out a hello world. I am...
View Articlecan't use webcam on my zedboard
Forums: TrainingI'm trying to boot a zynq z7000 with a linaro distribution and I'm following [this tutorial](http://fpga.org/2013/05/24/yet-another-guide-to-running-linaro-ubuntu-de...). I managed to...
View ArticleIs there anyone who can download training lab materials?
Forums: TrainingI want to download lab material from below training page: http://zedboard.org/course/developing-zynq%C2%AE-7000-all-programmable-s...by clicking the " Download the labs (Vivado...
View ArticleCan anyone POST the Training Lab Materials?
Forums: TrainingIt seems like people are getting hit by the unavailability of the training lab materials for the Developing Zynq®-7000 All Programmable SoC Software (Vivado 2013.3 and 2014.4.1)and the...
View ArticleLab 9 cpu1 BSP difficulties
Forums: TrainingHas anyone been doing the SW Speedway series and gotten to the dual processor software development and encountered a problem with creating the second (cpu1) bsp? I get a flood of errors...
View ArticleSpeedway Lab 10 Difficulties
Forums: TrainingIs anyone doing Lab 10 of the Speedway SW series and encountering the undefined value XPAR_FABRIC_PWM_W_INT_0_INTERRUPT_OUT_INTR in the examples? I have a complier error on this value...
View ArticleLoading a FPGA image using u-boot
Forums: TrainingIs there any training material which shows how to load a FPGA device image through uboot. I have a MicroZed board and would like to use uboot to load the FPGA image and the Linux Kernel...
View ArticlePetalinux support directory
Forums: TrainingI am doing the Petalinux training "PetaLinux for the Zynq®-7000 All Programmable SoC" and in the pdf documentations it refers to a support directory "~/Speedway/petalinux/labs/" where I...
View ArticleTraining Video Lab - Implementing Linux on the Zynq®-7000 All Programmable SoC
Forums: TrainingWhen I followed lab0.1 (Creating a Cross Build Platform for Zynq) to experiment 3. At step 13, to obtain Sourcery Codebench from the following URL, the link does not exist. I wonder...
View Articleerror detect phy
Forums: TrainingHi! I have a problem with Lab3 and was wondering if someone could help me please. I keep running in this error in Lab3/ Peripheral Test: "Error detect phy" the full output when launchig...
View ArticleZynqHW & ZynqSW 2016.2 SpeedWays
Forums: TrainingHello Everyone,We have recently updated out Zynq Hardware and Zynq Software Speedways to Vivado 2016.2. They are compatiable with Zedboard, MicroZed 7010/7020, and PicoZed...
View ArticleIntroduction to Zynq Hardware Lab3-MIO Peripherals
Forums: TrainingI am a new learner in studying Zynq and I started with the document 《Introdtion to Zynq Hardware》. Now I have a trouble in this process and I want to tell others to solve it. At the end...
View ArticleILA Core in Zynq Speedway Hardware Training Lab 8
Forums: TrainingIn experiment 2 of lab 8 you use hardware manager to connect to the ILA core you created in Lab 7. But, when you click "Run Trigger Immediate" (step 10) you get the following dialog:...
View ArticleZedboard: Unable to run Hello_World_ap.elf on linux
Forums: TrainingHi all, I have been following zedboard_refdoc_Vivado_2014-2.pdf with great success, but am running into difficulties in section 5.3 - running a Hello World example on Linux. I have...
View ArticlePetalinux speedway
Forums: TrainingI am trying to do lab 4 from Petalinux speedway "Accessing Hardware Devices from User Space". It is asking me to open a project in vivado ~/Speedway/petalinux/labs/accessHwUserSpace/...
View ArticleSDK
Forums: TrainingHi, I am trying to create my first project SDK with example Zedboard following:...
View Article
